For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII O2 2.4 GHz beltpack is specifically designed to work in Hyperbaric chambers safely, operating at atmospheric pressures of 5.1 atm, 517 kPa, or 75 psi with a change of +/- 26 psi per minute without damage.

KEY FEATURES

• Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
• Designed to work at atmospheric pressure up to 75 psi
• Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240 m)
• 1.9 and 2.4 GHz beltpacks operate on a single system
• Up to 65 – 90 beltpacks on a single system
• “Listen Again” message replay
• Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
• Over-the-air beltpack registration
• XLR-4M headset connector
• IP53 rating for wet and dusty conditions
• Built-in flashlight
• Uses AA alkaline or rechargeable Nickel Metal Hydride batteries

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII-TCVR-19 is an active transceiver antenna for the FSII-BP19 beltpacks. The antenna can be locally powered or powered via the FSII base station or matrix on shorter connections (less than 1000 ft). The FSII-TCVR-19 has a mount for wall or microphone stand. A green status light is visible from either mounting orientations. When mixed with FSII-TCVR-24 antennas, a single radio space can support up to 65-90 FreeSpeak II 1.9 GHz or 2.4 GHz beltpacks

KEY FEATURES

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The FSII-TCVR-24 is an active transceiver antenna for the FSII-BP24 beltpacks. The antenna can be locally powered or powered via the FSII base station or matrix on shorter connections (less than 1000 ft). The FSII-TCVR-24 has a mount for wall or microphone stand. A blue status light is visible from either mounting orientations. When mixed with FSII-TCVR-19 antennas, a single radio space can support up to 65-90 FreeSpeak II 1.9 GHz or 2.4 GHz beltpacks.

KEY FEATURES

• Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
• Uses existing FSII base, E-QUE-HX cards, and FSII splitter hardware
• Supports 4 FSII-BP24 beltpacks per FSII-TCVR-24 transceiver
• Supports systems with up to 65-90 beltpacks when mixed with FSII-19-TCVRs
• Blue LED status indicator on top and bottom
• Mic stand or wall mount orientation (metric and imperial threads)
• IP53 rating for wet and dusty conditions

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS  

The FSII-TVCR-IP-19 is an active transceiver antenna for the FSII-BP19 beltpacks. The transceiver connects to the Eclipse® HX matrix system via the E-IPA interface card. Each transceiver can support up to 10 FSII-BP19 beltpacks. When supported with the E-IPA card, up to 50 1.9 GHz beltpacks (in North America or 64 beltpacks in EU countries) and up to 64 transceivers can be supported on one Eclipse HX matrix system.

KEY FEATURES

• Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX card
• Requires E-IPA-HX card and an Eclipse HX frame (not available for FSII-BASE-II)
• For use with FreeSpeak II 1.9 GHz only
• Operates over IP on an AES67 compatible network
• Supports 10 FSII 1.9GHz beltpacks per transceiver
• Up to 64 transceivers supported on Eclipse HX matrix system
• Ethercon RJ45 network connections (2)
• High speed fiber SFP cages (2)
• Power-over-Ethernet (PoE) up to 300 ft (91 m)
• Green LED status indicator on top and bottom
• Mic stand or wall mount orientation (metric and imperial threads)
• IP53 rating for wet and dry conditions

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

The HelixNet® Digital Network Partyline Intercom System delivers intuitive and familiar workflows of Clear-Com’s analog partyline in a networked intercom system.

Built on 50+ years of Clear-Com’s heritage and experience with the elegantly simple analog partyline systems, HelixNet is a next generation partyline intercom system for users requiring fast setups, effortless management, scalability, deployment quality and adaptability to traditional and modern cabling infrastructure without interference from channel crosstalk, noise or buzzes.

Powered by Clear-Com’s advanced I.V.Core® technology, developed to provide efficient and easy-to-use partyline mixing on Ethernet networks. Invisible to the user, I.V.Core continuously analyzes voice activity, talk and listen levels through the system routing relevant audio packages to user stations and interfaces for optimal bandwidth utilization and listening experience.

Mixing and processing power is dynamically added to the system with each user station and interface in real-time, allowing the system to expand without the need of additional cards, routing or configuration – just like analog partyline.

KEY FEATURES

Familiar Partyline Channels

Built around familiar and innovative partyline channels, where all channel users can hear all talkers, HelixNet provides an easy transition for intercom users, allowing them to focus on their primary task with minimal assistance or training. Users can select or be assigned any of the system’s 12 or 24 channels with independently mixed Program Audio without change in system configuration, wiring, crosstalk or noises. Ease of deploying channels on HelixNet allows for efficient communication.

Effortless Administration

HelixNet user stations are automatically discovered, firmware matched and added to the system without configuration. Designed for fast operation, easy of use and flexible deployment, HelixNet allows configuration locally using intuitive front panel menus on the user stations, or centrally from the system’s Core Configuration Manager (CCM), an intuitive administration interface accessible on web browsers.

Infrastructure Agnostic

Concurrently capable of supporting user station connections over traditional XLR audio cabling and Ethernet networks allows for the most suitable connectivity for the application at hand.

Robust Powerlines allow user station network and power connections from a main station using rugged diagnostics. Ethernet and fiber provide the ability to utilize structured cabling as well as standard or converged networks, automatically adaptive to a wide range of network quality. Flexible power options over Powerline, Power-over-Ethernet (PoE) and local AC or DC power. HelixNet is unique in its infrastructural flexibility.

Flexible Interfacing

A wide variety of interfaces can be modularly added to HelixNet main stations to create the most common interfacing requirements, such as 2-wire and 4-wire line level. Seamless integration with LQ Series IP interfaces further expands interfacing density and enables the ability to add Station-IC or Agent-IC Virtual Intercom Clients for Windows, MacOS, Android and iOS, VoIP SIP telephone interfacing, two-way radio interfacing, GPIO and IP connections to E-IPA and/or IPA32 card-equipped Eclipse HX matrix systems.

Products in the Family

Main Stations - HMS-4X

Remote Stations - HRM-4X

Speaker Stations - HKB-2X     S-MOUNT

Beltpacks - HXII-BP

Interfaces - HLI-2W2     HLI-4W2     HLI-ET2     HLI-FBS

LQ Integration - LQ-2W2     LQ-4W2     LQ-4WG2    LQ-R2W4     LQ-R2W4-4W4     LQ-R4W8     LQ-R4WG8

Software - CCM

Accessories - BP-MOUNT

Simple HelixNet System

HMS-4X main station is the master of any HelixNet system connecting to user stations via Ethernet networks or via XLR Powerlines. Powerlines allow connectivity using standard 3-pin XLR cables, daisy-chained or split passively with all channels. User stations are powered via Powerlines, Power-over-Ethernet (PoE) or local power. HLI modules provide 2-wire partyline and 4-wire ports.

Featured HelixNet Products:

• HMS-4X
• HRM-4X
• HKB-2X with S-MOUNT
• HXII-BP
• HLI-2W2
• HLI-4W2
• CCM for HelixNet

Other Featured Products:

• MS-704
• FSII-BASE-II
• CC-300

For full specifications of this product please visit the Clear-Com site clicking HERE

KEY FEATURES

• 2.4GHz license-free operation
• Supports up to 4 full-duplex or 15 push-to-transmit shared users
• Portable, compact design
• Weather-proofed gaskets
• Power via 100-240V AC, 12V DC, 1.5V “AA” batteries or an optional rechargeable BAT850 battery

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

KEY FEATURES

• Up to 4 full-duplex or 15 half-duplex beltpack and/or all-in-one headset users per base station
• Link two bases together to support a maximum of 30 users
• Single or dual-channel operation
• 7kHz wideband audios
• Lost packet concealment
• Better RF filtering than DX300ES
• Secure 64-bit encryption
• Dedicated channel relays
• 10-pin terminal strip connector for easy connection to 4-wire intercom systems
• Triple diversity (space, time and frequency) operation for extreme multi-path environments
• No frequency coordination or licensing for operation
• Power via 100-240 VAC, 12-14 VDC, 1.5V “AA” batteries or an optional rechargeable BAT850 battery

For full specifications of this product please visit the Clear-Com site clicking HERE

KEY FEATURES

• Operate between 486.4 and 639.9MHz
• Stand alone or rack mountable with the PRK-2 kit
• Selectable Low-Frequency roll-off
• “Locked” setting prevents accidental changes
• Overcomes channel noise and compandor artifacts
• Tough machined aluminum case housing

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

In high profile broadcast environments operating around the clock, communication by its very nature is critical to success. Proven reliability, capabilities and performance make the professional intercom system an absolute essential for any production.

For private one-to-one, group and conference calls, Trilogy’s Gemini matrix intercom allows productions to simply and quickly initiate, conduct and manage conversations with simple user operations and intuitive configuration controls. The system is ideal for applications requiring cost-effective, entry-level package solution that can scale into a larger communication network.

KEY FEATURES

Highly Scalable

Scale the Gemini matrix intercom system to 64 channels of Digital Signal Process (DSP)-based IP communications support, up to 12 camera channels and an enhanced front panel with alarm features. The Gemini system offers 8 to 32 local ports for panels, analog and digital audio interfaces, and telephony within a single 2RU matrix. Gemini can be expanded to 8 matrices with 256 ports via the dual redundant ring connectivity that provides program quality performance for hundreds of simultaneous conversations with near-zero latency and digital audio network (High Speed Link – HSL).

Flexible Interface Options

Select from a range of interface boards and conventional control panels over CAT5, analog 4-wire audio equipment, analog telephone lines, AES/MADI streams or IP-enabled panels. The optional IP capability allows up to 64 channels of voice to be carried over any standard IP network to other Trilogy matrices. It also carries all inter-matrix messaging and system configuration data. Gemini’s GPI capability allows external control access to an extensive array of audio routing and logic functions.

Gateway Configuration Editor

Gemini system configuration is performed using Trilogy’s Gateway software which provides unrestricted ability for users to build, modify and save multiple databases to suit any operational requirement. Users can set any system parameter to suit their needs and preferences, from changing key assignments, to audio level adjustment, or extensive re-configuration of an entire network. Gateway’s Access Management facility offers role-based administration and security, providing selective control over individual Gemini matrices or the entire communication network. And a browser-based utility gives authorized users remote access to all engineering and maintenance functions.

Extensive Operator Devices

Compatible with the Gemini intercom system is an extensive range of versatile, high-quality operator panels that are highly flexible and intuitive. With choices including dual-action lever key, touchscreen and virtual panels, these control panels are designed and manufactured to meet the demanding standards of production users and assure reliability, flexibility of operation and ease of use.

Products In Family

System Frames

Keypanels

Touchscreen Panels

Interface Boards

Virtual Panels

Software

System Diagram

Gemini features comprehensive integrated IP capabilities together with interfaces to 4-wire circuits, telephony, AES/MADI, IP panels and SIP for analog or IP based solutions. Gemini supports a range of panels including desktop and rack mount lever keypanels, touchscreen button panels, and Virtual panels for smartphones and tablets.

For full specifications of this product please visit the Clear-Com site clicking HERE

PRODUCT DETAILS

Wireless IFB (interruptible fold back) systems operate between 486.4MHz and 639.9MHz. They are used for one-directional communication. Directors and other management can use this to monitor program audio or for talent cueing and crew communications during a production.

NOTE: This product is not approved for sale in Europe.

NEW FCC REGULATIONS:

Going forward, anyone selling a wireless microphone or other device designed to operate in the restricted 600 MHz wireless service band (617-652 MHz / 663-698 MHz) will be required to notify buyers at the point of sale that the device may no longer be used after July 13, 2020, and that users may be required to cease operation earlier if using the device could cause harmful interference that disrupts wireless communications for new service licensees.  DA 17-709

The manufacture, import, sale, lease, offer for sale or lease, or shipment of wireless microphones or similar devices intended for use in the United States that operate on the 600 MHz service band frequencies (617-652 MHz and 663-698 MHz) is prohibited after October 13, 2018 ( See FCC 15-100,  FCC 15-99, DA 17-314, FCC 17-95).

https://www.fcc.gov/wireless/bureau-divisions/mobility-division/wireless-microphones

KEY FEATURES

Simple Design and Operations

Operate with ease with the simple designs and intuitive operations of the wireless IFB transmitter and receiver beltpack.  Even the novice users can begin the basic operation in matter of minutes.

Frequency Agility and Selection

Avoid interference problems in mobile or traveling applications with the PTX-3 transmitter. With its synthesized, frequency selectable main oscillator, the frequency is extremely stable over a wide temperature range and over time.

Products in Family 

Transmitter - PTX3

System Diagram  

Basic one IFB to one receiver beltpack configuration

Expanded Diagram

In this expanded Wireless IFB setup, multiple UHF wireless IFBs systems can be connected to a single partyline system or digital matrix system to allow multiple mobile users to receive program audio or IFB feeds simultaneously.