Falamos Português
Hablamos Español
Li-Ion Power Cartridges
For IDX ELITE Battery - 2pcs
by Idx
Ref # PC-14
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The PC-14 are designed exclusively for use with the 136Wh ENDURA ELITE Li-ion V-Mount battery. The PC-14 are supplied as two 68Wh Power Cartridges and can be fitted into an existing ELITE battery housing, enabling users to get the best out of their investment and upgrade cost-effectively
KEY FEATURES
| Capacity: | 68Wh, 14.4V, 4.6Ah (9.6Ah as a pair) |
| Maximum Discharge Current: | 55W |
| End Voltage: | 12V |
| Dimensions: | 3.22(W) x 6.02(H) x 0.82(D) inches |
| Weight: | 0.9 lbs approx. |
48Wh 14.4V Li-ion Battery
for Sony BP-U Series w 1x D-Tap and USB
by Idx
Ref # SB-U50
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
Extra high-capacity 14.4V Lithium Ion battery for Sony U-type mount cameras FS5, FS7, FX9, PMW series camcorder, and more.
* Minutes displayed in the viewfinder may not be accurate on some Sony cameras, LED on the battery should be used to monitor the remaining capacity.
KEY FEATURES
| Charger | 1 ch | 2 ch |
| Sony BC-U1A | 1:45 | NA |
| MOTIX MC-2U | 2:15 | calculating |
| Capacity: | 48Wh (14.4V/ 3.3Ah) |
| Max Output Voltage: | 16.8V DC |
| Nominal Voltage: | 14.4V DC |
| Max Discharge Current: | 3.2A‡ |
| D-Tap: | 35W each |
| USB: | DC 5.0V /2.3A |
| End Voltage: | 11V |
| Battery Protection: | Over charge, Over discharge, Over current |
| Ambient Temperature: | To charge: 32°F ~ 104°F (50°F ~ 86°F recommended) To discharge: -4°F ~ 113°F (50°F ~ 104°F recommended) To store: -4°F ~ 122°F (one month) |
| Dimensions: | 1.63(W) x 2.6(H) x 2.74(D) inches |
| Weight: | 0.53 lbs approx. |
| ‡ may vary depending on the operating temperature |
96Wh 14.4V Li-ion Battery
for Sony BP-U Series w 2x D-Tap and USB
by Idx
Ref # SB-U98
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
Extra high-capacity 14.4V Lithium Ion battery for Sony U-type mount cameras FS5, FS7, FX9, PMW series camcorder, and more.
* Not compatible with Sony BC-CU1 charger. Minutes displayed in the viewfinder may not be accurate on some Sony cameras, LED on the battery should be used to monitor the remaining capacity.
KEY FEATURES
| Charger | 1 ch | 2 ch |
| Sony BC-U1A | 3:45 | NA |
| MOTIX MC-2U | 4:10 | 7:40 |
| Capacity: | 96Wh (14.4V/ 6.6Ah) |
| Max Output Voltage: | 16.8V DC |
| Nominal Voltage: | 14.4V DC |
| Max Discharge Current: | 6.4A‡ |
| D-Tap: | 70W each |
| USB: | DC 5.0V /2.3A |
| End Voltage: | 11V |
| Battery Protection: | Over charge, Over discharge, Over current |
| Ambient Temperature: | To charge: 32°F ~ 104°F (50°F ~ 86°F recommended) To discharge: -4°F ~ 113°F (50°F ~ 104°F recommended) To store: -4°F ~ 122°F (one month) |
| Dimensions: | 1.63(W) x 4.12(H) x 2.74(D) inches |
| Weight: | 0.99 lbs approx. |
6600mAh Sony L-Series Battery
with X-Tap & USB
by Idx
Ref # SL-F50
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
Extra high-capacity 7.2V Lithium Ion battery compatible with all equipment and accessories using the Sony L-series battery.
Equipped with 2 additional outputs, X-Tap & USB, to provide power to multiple accessories at once. X-Tap is an IDX proprietary output port and is different from D-Tap (7V vs 12V), but can also be a charge port using our LC-XT1 portable charger. C-XTAP2 is also available to create your own cable for your setup.
The SL-F series are compatible with most Sony and 3rd-party chargers. (Not compatible: Sony AC-VQ1051D)
KEY FEATURES
| Capacity: | 6600mAh, 48Wh |
| Max Output Voltage: | 8.4V DC |
| Nominal Voltage: | 7.2V DC |
| Max Discharge Current: | Main Connector: 30W/6.0A X-Tap: 20W/4A USB: 2.3A |
| Battery Protection: | Over charge, Over discharge, Over current |
| Dimensions: | 1.5(W) x 2.41(H) x 2.78(D) inches |
| Weight: | 0.55 lbs approx. |
9900mAh Sony L-Series Battery
with X-Tap & USB
by Idx
Ref # SL-F70
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
Extra high-capacity 7.2V Lithium Ion battery compatible with all equipment and accessories using the Sony L-series battery.
Equipped with 2 additional outputs, X-Tap & USB, to provide power to multiple accessories at once. X-Tap is an IDX proprietary output port and is different from D-Tap (7V vs 12V), but can also be a charge port using our LC-XT1 portable charger. C-XTAP2 is also available to create your own cable for your setup.
The SL-F series are compatible with most Sony and 3rd-party chargers. (Not compatible: Sony AC-VQ1051D)
KEY FEATURES
| Capacity: | 9900mAh, 72Wh |
| Max Output Voltage: | 8.4V DC |
| Nominal Voltage: | 7.2V DC |
| Max Discharge Current: | Main Connector: 40W/8.0A X-Tap: 20W/4A USB: 2.3A |
| Battery Protection: | Over charge, Over discharge, Over current |
| Dimensions: | 1.5(W) x 3.17(H) x 2.78(D) inches |
| Weight: | 0.77 lbs approx. |
4ch Simultaneous Li-ion
V-Mount Battery Charger w/LCD
by Idx
Ref # VAL-4SI
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VAL-4Si is one of the most advanced chargers on the market, capable of charging up to 4 batteries simultaneously.
Monitoring the status of each individual battery is an LCD display and control panel located on the front of the unit. Joined with IDX’s BMS software, the VAL-4Si – via PC interface – provides battery data on history and condition of the batteries as a means to help manage and extend overall battery life.
The VAL-4Si is a multi-chemistry charger, charging NP-style batteries and additional ENDURA batteries using optional cable assemblies.
KEY FEATURES
| Input Voltage: | AC 100-240V 50/60Hz |
| Power Consumption: | 310VA max |
| Quick Charge Current: | Li-ion: 2.3A (4 channels), 3A (1-3 channels) Ni-CD/Ni-MH: 1.9A (1-4 channels) |
| Quick Charge System: | Li-ion: Constant current/Constant voltage Ni-CD/Ni-MH: Constant current |
| Pre-Charge Current: | 360mA approx |
| Operating Temperature: | 14°F ~ 104°F |
| Dimensions: | 6.3(W) x 7.87(H) x 11.34(D) inches |
| Weight: | 9.7 lbs approx. |
| Included Accessories: | Battery Management Software, (1) USB cable |
| Optional Accessories: | A-E2NP, C-VAL2E |
2ch Simultaneous Li-ion
V-Mount Battery Charger
by Idx
Ref # VL-2000S
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VL-2000S is a fully simultaneous 2-channel Li-ion V-Mount battery charger with a 100W DC output (4-pin XLR).
Supporting LIFE PLUS mode, the latest advances in charging technology, the VL-2000S can extend battery life up to 20%. The VL-2000S features Power Base mode – the ability to utilize the mounted batteries for powering equipment via the 4pin XLR output.
Low voltage batteries are safely charged with the ‘Recovery Charge’ mode. The charger also houses energy efficient circuitry that will automatically power down the charger when inactive.
KEY FEATURES
| Input Voltage: | AC 100-240V 50/60Hz |
| Quick Charge Current: | Li-ion: 4A (4 channels), 3A (2 channels) |
| Quick Charge System: | Li-ion: Constant current/Constant voltage |
| DC Output: | 100W max |
| Operating Temperature: | 14°F ~ 104°F |
| Dimensions: | 9.19(W) x 3.22(H) x 7.16(D) inches |
| Weight: | 2.74 lbs approx. |
2ch Sequential Li-ion
V-Mount Battery Charger
by Idx
Ref # VL-2PLUS
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The lightweight and durable VL-2PLUS delivers sequential 2-channel charging with unrivalled high speed and reliability, with the advantage of an integrated 60W power supply.
Like all of our VL Series, the VL-2PLUS is a multi-chemistry charger for both Li-ion and Ni-Cad battery types.
KEY FEATURES
| Input Voltage: | AC 100-240V 50/60Hz |
| Power Consumption: | 140VA max |
| Quick Charge Current: | Li-ion: 2.3A Ni-CD: 1.9A |
| Quick Charge System: | Li-ion: Constant current/Constant voltage Ni-CD: Constant current |
| DC Output: | 60W max |
| Operating Temperature: | 32°F ~ 104°F |
| Dimensions: | 5.94(W) x 3.11(H) x 8.35(D) inches |
| Weight: | 2.09 lbs approx. |
2ch Sequential Li-ion
V-Mount Battery Charger
by Idx
Ref # VL-2X
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VL-2X is a slim, lightweight 2-channel charger with the added advantage of an integrated 36W power supply.
With a fanless design, the VL-2X also delivers high power charging without the noise of a typical quick charger. The VL-2X is a multi-chemistry charger for both Li-ion and Ni-CD battery types.
KEY FEATURES
| AC Adapter Input Voltage: | AC 100-240V 50/60Hz |
| AC Adapter: | UT60-150400 |
| Power Consumption: | 140VA max |
| Charge Current: | 1.9A/ max 2.7A |
| Charging Method: | Constant current/Constant voltage |
| DC Output: | 36W max |
| Operating Temperature: | 32°F ~ 104°F |
| Dimensions: | 3.44(W) x 7.22(H) x 4.98(D) inches |
| Weight (Charger): | 1.0 lbs approx. |
| Weight (AC Adapter): | 0.7 lbs approx. |
4ch Simultaneous Li-ion
V-Mount Battery Charger
by Idx
Ref # VL-4SE
For full specifications of this model of products please visit the IDX site clicking HERE
PRODUCT DETAILS
The VL-4Se is a fully simultaneous 4-channel charger, housed in a high-impact, polycarbonate
KEY FEATURES
| Input Voltage: | AC 100-240V 50/60Hz |
| Power Consumption: | 220VA max |
| Quick Charge Current: | Li-ion: 2.7A (4 channels), 3A (1-3 channels) |
| Quick Charge System: | Li-ion: Constant current/Constant voltage |
| Pre-Charge Current: | 140-300mA approx |
| Operating Temperature: | 32°F ~ 104°F |
| Dimensions: | 6.14(W) x 6.02(H) x 11.34(D) inches |
| Weight: | 5.95 lbs approx. |
- ««
- « Previous
- 1
- 2
- 3
- 4
- Next »
- »»
Showing: 21 to 30 of 35