PRODUCT DETAILS:

The MAVO Edge 6K is a powerful new full-frame cinema camera. Equipped with a 6K full-frame 3:2 CMOS imaging sensor capable of shooting in 6K 75fps and 4K 150fps based on the high-performance computing platform of the MAVO Edge, the camera features dual native ISO (800/5120) and excellent highlights under various sensitivity settings. MAVO Edge 6K has an internal motorized full-spectrum e-ND filter(0.6-2.4), and integrates industry-standard ports and dual SSD media slots, capable of recording Apple ProRes4444/XQ and uncompressed RAW onto recording media based on NVMe M.2 2280 SSD. Weighing at only 3.6lbs, this compact and lightweight camera boasts powerful performance and versatility as it adapts to various demanding shooting scenarios. Like other Kinefinity cine cameras, MAVO Edge 6K brings natural color, pleasing skin tones, low noise, high dynamic range, and stunning details in an organic and delicate way.

The MAVO Edge 6K is the latest full-frame camera from Kinefinity since the release of MAVO Edge 8K, and it employs a full-frame 3:2 CMOS imaging sensor that not only shows cleaner images but also provides wider viewing angles, shallower depth of field, and more immersive presence. The advanced color processing architecture from the MAVO Edge platform creates images with low noise, high latitude, and wide color gamut, then brings stunning details, organic images with exceptional quality. In addition, the full-frame 6K CMOS sensor is perfectly paired with OLPF FF3 optical low pass filter that adopts a more complex and higher performance crystal process to“eliminate” aliasing/artifacts while keeping very sharp images.

The MAVO Edge 6K is equipped with dual native ISO, rated at 800 and 5120, as the second native ISO up to 5120 is perfect for low light scenes to obtain a clean image with high latitude and low noise, ideal for documentary filmmakers or those who favor available light during night shoots. 

MAVO Edge 6K outperforms its predecessor of MAVO LF a lot when it comes to highlight performance. At the industry standard ISO 800, the default highlight of the Edge 6K is 6.0 stops, capturing more highlight details to get a more cinematic look. Switch to Cine EI mode for more of a traditional cinema camera experience and highlight stops will adjust automatically as the EI changes. While using Cine EI mode, the second base native ISO 5120 is still activated when you go past 1600 EI.

From Apple ProRes422 LT to ProRes4444 XQ and uncompressed RAW codec, the MAVO Edge 6K is capable of recording high-resolution images with high dynamic range and with low to zero compression artifacts.

The MAVO Edge 6K supports 12-bit ProRes4444XQ in full frame rate and resolution, and it records with Kine LOG3 Gamma to preserve all the dynamic range captured by the CMOS imaging sensor.

The MAVO Edge 6K is equipped with a dual SSD slot based on PCIe-3.0 and its recording media, blazing-fast KineMAG Nano 1TB, is based on NVMe M.2 2280 SSD, ensuring storing uncompressed RAW stably and safely.

From capturing image data to color calibrating and tuning during encoding 6K ProRes4444XQ or storing uncompressed RAW to M.2 SSD, all these internal high bandwidth processing happens within the compact and lightweight body of the MAVO Edge 6K, quietly.

The MAVO Edge 6K is implemented with the latest KineOS 7.0 firmware, which has a redesigned user interface, and expected touch and tapping interaction with the camera. The new KineMON-5U2 and 7U2 with touchscreen monitors help to improve the user’s interactive experience and lower the learning curve.

The new interface design allows the user to control the entire functionality of the camera using only the touchscreen monitor.

Frame rate, shutter angle, ISO, aperture, ND strength, color temperature, LUTs, and audio levels can all be adjusted via touchscreen control, making it easy for the cinematographer to set up the parameters quickly.

In addition to the new UI, the MAVO Edge 6K firmware has come with many features. KineOS 7.0 supports Cooke/i protocol which enables the camera to record and save lens metadata into the footage, speeding up VFX workflow. Recording media also supports both NTFS and HFS file systems, for Windows and macOS.

The MAVO Edge 6K will also implement the pre-recording function in an anticipated firmware update. It ensures the cinematographer will not miss any shot during unpredictable scenes, providing a useful solution in live events and documentary works.

MAVO Edge 6K inherits the integrated body design of Kinefinity’s flagship product, MAVO Edge 8K which won the prestigious iF DESIGN AWARD 2021. Its ultra-high strength deformed Aluminum body has superior strength and toughness even at high temperatures to meet a wide range of photographic needs.

The compact camera body of the MAVO Edge 6K only weighs 1.6kg(3.6lbs), and it is equipped with a full-spectrum e-ND filter, dual SDI ports, multiple control ports, and multi-channel audio tracks, as well as powerful wired and wireless functions. The monitoring image from two proprietary video ports is independently displayed from SDI outputs at the rear. The video ports can be connected to the Kinefinity touchscreen monitor and micro-OLED viewfinder.

Kinefinity camera is with a native short flange distance KineMOUNT since KineRAW-S35, the first generation cinema camera released in 2012. 

MAVO Edge 6K is using the third-generation KineMOUNT that matches the large-format CMOS image sensor: With an ultra-short FFD and cine style locking method, the KineMOUNT can match richness of mounting adapters such as EF, passive E , PL and the LPL mounts that allows the photography to pair variable lenses with MAVO Edge camera seamlessly and capture with a wide range of lens styles. 

Whether small creation or large production can be handled easily with MAVO Edge 6K. 

CMOS IMAGING SENSOR

6K 3:2 Full Frame CMOS Imaging Sensor

Max Record Resolution: 6016×3984 (Open gate 3:2), 24M

Frame Rate: 0.2~75fps @FF 6K Wide, 0.2~150fps @S35 4K

Active Area: Wide 36x24mm, ø 43.3mm

Dual Base ISO: Regular Base ISO: 800 (500 – 2560), High Base ISO: 5120 (3200 – 20480)

Latitude: >14 stops

Shutter Angle: 0.7°~358° with rolling shutter

Lens Mount: Omni Native KineMOUNT,
                     Short FFD Adapters: PL/LPL/Active EF/passive EOLPF with UV and IR-cut filter

ND Filter: Built-in motorized: Clear and e-ND from 0.6 to 2.4

CODECS, LUT

Record Codec

LUT

Record Media

KineLOG3, Neutral(Rec 709), Support Custom 3D LUT

Media Slot x2, for KineMAG Nano SSD 1TB based on NVMe M.2 SSD (3rd party NVMe M.2 2280 cards are also supported via the KineMAG Nano card body)

KineMAG Nano Size

1.6×3.5×0.35”/40x88x9mm (WxHxL)

RESOLUTION, FRAME RATE and OPTICAL FORMAT

Full Frame

S35

Other Cropping

MONITORING

Proprietary Video Port x2

SDI x2

For Kinefinity Viewfinder, KineMON-5U2/7U2 Ultra Bright Monitor with Touch Screen

3G/1.5G SDI x2 with Meta data (regular BNC)

AUDIO IN AND OUT

Linear PCM, 24bits, 48KHz

Built-in Mono Microphone

3.5mm Microphone Jack

48V Phantom-power Balanced Input x2 (regular XLR)

3.5mm Headphone Jack

Wireless & Network

Gigabit Ethernet (RJ45 type) for live stream, camera control and data transfer

WIFI 5 for live stream, camera control

3-axis accelerometer

SYNC AND CONTROL

Linear TC In&Out (0B5P)

Lens with RS232, Power output (0B6P)

SYNC with RS232 and Kinefinity camera sync(0B7P)

Rec trigger input with Power output (fisher 3P)

Data & Control, EXT1 & EXT2(for pogo-pin, 2×4 contacts)

Type-C USB x1, can be used for firmware updates and importing custom LUTs

POWER IN AND OUT

29W, when 6K HD 25p, liveview

Integrated V-mount battery plate, V-mount battery or BP-U compatible

DC Input (1B2P), 11~26V

UPS EXT 3(for pogo-pin, 2×5 contacts)

D-tap x1, Vbat @3A; Vbat as DC in or BAT in

RS x1, Vbat @3A (Shared with D-tap)

Lens x1, Vbat @3A

CONSTRUCTION AND SIZE

Ultra-high Strength Aircraft Aluminium

3.5lb/1.6kg

4.1×4.8×4.3?/106x124x109 mm (*w/o protrusion)

0°C ~ 40°C

PRODUCT DETAILS

The MAVO Edge 8K is a brand-new large-format 8K cine camera. With a whole-new carbon fiber camera body, MAVO Edge is equipped with a stunning 8K 70P CMOS imaging sensor and cutting-edge image processing engine, which elevate the Kinefinity camera system to a whole new level. Featuring internal motorized full-spectrum e-ND, more industry-standard ports and dual SSD media slots, the highly integrated MAVO Edge still remains very compact and lightweight. At the same time, Kinefinity brings Apple ProRes4444/XQ up to 8K to the MAVO Edge as an in-camera codec to make the workflow easier.

The new 8K imaging sensor on the MAVO Edge is an amazing canvas with 45 million pixels on a 36x24mm full-frame CMOS sensor featuring 640/2560 dual native ISO, 8K Wide up to 70fps and latitude up to 14+ stops. Even at open gate 3:2 , surprisingly this beast can still deliver a gorgeous image of 45 million pixels at up to 45 frames per second. All of these features allow cinematographers to create without boundaries, no matter for feature movies, production with VFX, high-end TV commercial and series, even wild-life documentaries. Not just getting highest resolution for motion pictures, MAVO Edge ensures natural color, pleasing skin tones, low noise, high dynamic range and stunning details in organic and delicate way, cinematically.

MAVO Edge can directly record Apple’s ProRes4444/XQ codec which has been highly expected by the video industry. From the capture of its 8K CMOS image over the delicate color processing to the 8K ProRes4444 encoding and storage, these complex processes and the ultra-high bandwidth bitrate processing all happen within the compact MAVO Edge body. Aside from this, MAVO Edge also supports in-camera ProRes4444/XQ and ProRes422HQ.

Recognized by Hollywood’s filmmaking industry, ProRes is an universal intermediate codec led by Apple Inc., delivers the flexibility of video with the incredible performance of ProRes in a format ideal for high-dynamic-range (HDR) content creation. For now, ProRes can be edited and graded in Apple Final Cut Pro X, Assimilate SCRATCH, Filmlight Baselight and so on.

The whole-new integrated carbon fiber body has incorporated the full-spectrum e-ND system, dual SSD slots with blazing-fast NVMe M.2-based KineMAG Nano, comprehensive networking and creative power solution.

MAVO Edge integrated the functions of KineBACK-W into the camera body with numerous professional ports: dual XLR ports for Phantom-powered 48V MIC, dual 1.5G/3G-SDI monitoring outputs with metadata and audio embedded, time code input and output, SYNC, DC Power output, innovative hybrid battery plate with D-Tap port, and 12V RS port and Lens port (12V) to power the third-party accessories like wireless video transmitter and wireless lens motor directly.

New-designed KineKIT Edge includes innovative baseplate, more compact EVF bracket, much stable Top Handgrip and new Side Support, which are flexible for MAVO Edge to use in different scenarios.

Movcam brings dedicated KineKIT for MAVO Edge, especially the innovative 15mm baseplate with UPS function powered by two NP-F550 type batteries, due to specialized UPS power contacts at the bottom of MAVO Edge. New-designed KineKIT from Movcam takes into account of MAVO in different scenarios, such as hand-held, tripod, on shoulder, gimbal, high and low shooting angles, etc., which makes it best choice for MAVO Edge.

SPECIFICATIONS:

For full product specifications click HERE

PRODUCT DETAILS:

Combining a high-performance processor with the same full-frame 3:2 CMOS image sensor found in the MAVO Edge 6K, the MAVO mark2 6K LF Digital Cinema Camera from Kinefinity offers high 6K frame rates up to 96 fps, detailed highlights, organic images, and outstanding low-light performance with dual native 800/5120 ISOs. Use the included, adaptable KineMOUNT and separately available adapters to provide compatibility with EF, PL, and LPL mounts and Kinefinity's new active PL and Sony E-mount adapters.

MAVO mark2 adopts the MAVO Edge high-performance computing platform, integrates industry standard ports like independent dual SDI outputs with meta data and encodes stunning images as Apple ProRes4444/XQ footage onto NVMe M.2 2280 SSD. Coming in the lightweight compact camera body with the streamlined workflow, MAVO mark2 S35 and MAVO mark2 LF provide more cinematographers with a professional and efficient filmmaking experience at a more affordable price.

Back to classic S35 image format, MAVO mark2 S35 is designed to cater to use S35 glass, widely available, more styles even more affordable than full frame counterparts.

Building on the advanced computing platform, the new camera configures a new S35 3:2 CMOS imaging sensor which allows users to capture up to 6K Wide 96fps, 4K Wide 150fps. The new sensor also features dual native ISO 800/3200 like MAVO Edge 8K, that means the images from the new camera much less noise than previous generation. MAVO mark2 S35 with new S35 sensor on advanced platform offers cleaner shadows, better highlight details, wide latitude to 14 stops and higher frame rate no matter low light conditions or studio shooting.

The MAVO mark2 LF continues to feature the remarkable 6K full frame 3:2 CMOS imaging sensor from the popular MAVO Edge 6K, maintaining high frame rate of up to 75fps at 6K Wide, 150fps at 4K Wide and amazing dual native ISO 5120/800. The industry-standard ISO 800 is regular for shooting in normal light scenes, while the second native ISO up to 5120 is perfect for low light scenes to obtain a clean image with high latitude and low noise, ideal for documentary filmmakers or those who favor available light during night shoots. Compared to MAVO LF, MAVO mark2 is capable to retain more highlight details, ideal for shooting in complex lighting environments, presenting organic images and cinematic look.

MAVO mark2 offers more comprehensive lens options by introduction of new mount, embracing the broader and more modern lenses with its interchangeable mount design. It can work smoothly with virtually all cine PL/LPL lens, DLSR EF lens and modern E mount lens, capturing images with more diversified styles.

Native KineMOUNT: The first cinema camera KineRAW-S35 launched by KINEFINITY in 2012 was equipped with the short flange distance native KineMOUNT. KineMOUNT is very convenient for switching mount adapters including EF, PL and LPL adapters without tools.

In addition to keeping the exclusive native KineMOUNT, MAVO mark2 provides two new lens mounts: the Active PL Mount and Active E Mount. Users can install and detach the active mounts without extra flange distance calibration. 

Active PL Mount: The reliable cine-style locking mechnism enables the active PL mount to connect the lens with the camera toughly. It supports the Cooke/i protocol, and can saves them into the clip, bringing intuitive interaction on set and flexibility in post.

Active E Mount: MAVO mark2 with the Active E Mount can support most of modern and lightweight E lenses instantly. It allows users to tune the iris, focal length and focus of these electronic E lenses in camera control or manually, also the lens optical stabilization can be activated if the lens has the option.

Apple ProRes4444 Recording

MAVO mark2 has the powerful capability of directly recording high-quality clips in camera from Apple ProRes 422 LT to ProRes 4444XQ. The advanced architecture allows the MAVO mark2 to record ProRes4444XQ format and and records Kine LOG3 Gamma to preserve all the dynamic range data captured by its CMOS image sensor,  achieving fast post-production workflow.

Safe and Flexible Recording Media

The SSD slot of MAVO mark2 is based on PCIe, and the recommended recording media is the proprietary KineMAG Nano 1TB/2TB based on NVMe M.2 2280 SSD. KineMAG Nano SSD has two superior safety features: Read-only and RAID 5. It improves the safeness of the KineMAG Nano while copying or writing to the SSD at blazing fast speed in camera. With a universal USB-C port, KineMAG Nano allows offloading data to the workstation at a speed of up to 10Gbps.

Integrated Body Design: MAVO mark2 inherits the integrated body design of MAVO Edge camera which has won the prestigious iF DESIGN AWARD 2021. The compact camera body only weighs 1.35kg(2.98lbs), equipping with a host of general control ports, dual SDI outputs embedded metadata and audio, and high-quality multi-channel audio recording.

Comprehensive Power Solution: The MAVO Edge 6K offers an innovative hybrid battery plate to accommodate power demands in various shooting scenarios. The hybrid battery plate supports 14.8V V-mount batteries like KineBAT PD 75w/150w. It also supports BP-U type batteries like GripBAT 4S to meet the power demand of complicated camera setups that require a light build. With the addition of Movcam’s cage, the KineKit-Edge, NP-F550 type batteries like GripBAT 2S can support an Uninterruptible power supply to the camera via the UPS Baseplate.

PRODUCT SPECIFICATIONS:

For complete product information click HERE

PRODUCT DETAILS:

Built around a high-performance processor and a new S35 3:2 CMOS image sensor, the MAVO mark2 6K S35 Digital Cinema Camera from Kinefinity is ready to work with the large variety of existing Super35-format lenses using a separately available KineMOUNT and lens adapter of your choice. And with frame rates up to 6K 96 fps and 4K 112 fps, dual native 800/3200 ISOs, 14+ stops of dynamic range, and cleaner imaging, the MAVO mark2 S35 offers enhanced video capture in both standard and low-light settings.

MAVO mark2 adopts the MAVO Edge high-performance computing platform, integrates industry standard ports like independent dual SDI outputs with meta data and encodes stunning images as Apple ProRes4444/XQ footage onto NVMe M.2 2280 SSD. Coming in the lightweight compact camera body with the streamlined workflow, MAVO mark2 S35 and MAVO mark2 LF provide more cinematographers with a professional and efficient filmmaking experience at a more affordable price.

Back to classic S35 image format, MAVO mark2 S35 is designed to cater to use S35 glass, widely available, more styles even more affordable than full frame counterparts.

CMOS Image Sensor

A new 3:2 CMOS image sensor and advanced processing enable the MAVO mark2 S35 to better retain highlight details, enhancing your capture of nuanced lighting environments.

High frame rate options include up to 6K wide 96 fps and 4K wide 112 fps for creating beautiful slow-motion sequences.

Kine LOG3 gamma recording preserves the complete dynamic range captured by the sensor.

Comprehensive Lens Options 

• The MAVO mark2 S35 offers the broadest range of lens compatibility, working with almost any lens.
• Compatible with cine-style, EF-mount, and electronic Sony E-mount lenses and more using adapters.
• The separately durable, separately available KineMOUNT can be quickly adapted for use with EF, PL, and LPL adapters.
• Use the MAVO mark 2 S35 with the new active PL and Sony E-mounts to add electronic control when using compatible lenses.
• The separately available active lens mounts support focus, iris, zoom, and image stabilization functions.
• The active Sony-E mount supports lens metadata display and transfer as does the active PL mount (Cooke/i technology).

Advanced Processing 

• High-performance computing provides advanced color processing and better highlight performance.
• Greater storage bandwidth enables Apple ProRes 4444/XQ clips to be recorded to KineMAG Nano SSDs.
• Upload custom 3D LUTs or use the Rec.709 neutral in-camera LUT.

Lightweight, Integrated Body 

• The compact MAVO mark2 6K S35 body weighs just 3 lb, suiting it for handheld and gimbal use.
• Interfaces include two proprietary video outputs, one HD video output, and a control port.
• The MAVO mark2 S35 offers multichannel audio recording, an RS-232 port, and an RS power/trigger port.
• A hybrid battery plate supports both 14.8V V-mount and smaller BP-U batteries.

Accessory Options 

• The MAVO mark2 S35 is compatible with Kinefinity TERRA accessories.
• An OLED viewfinder, 5" or 7" monitor, and SideGrip are available separately.
• Use with the separately available KineBACK-W to add dual 3G-SDI, dual XLR audio, timecode, sync, and additional interfaces.

Frame Rate and Resolution Options 

• The MAVO mark2 S35 offers Apple ProRes recording options ranging from 422LT to 4444XQ.
• Frame rate and resolution options are available at rates up to 6K wide in 4444XQ.
• These ProRes codecs speed up your workflow, saving significant time in post-production.

S35 Anamorphic 

• The MAVO mark2 S35 offers both 5.3K 4:3 and 4.9K 6:5 anamorphic modes, enabling you to choose S35 2x or 1.33x anamorphic lenses.
• Images are de-squeezed in the camera for easier monitoring.

Flexible Recording Media 

• Record using the proprietary 1TB or 2TB KineMAGs with read-only and RAID 5 safety features.
• Use the KineMAG Nano Body to record to third-party NVMe M.2 2280 SSDs.

PRODUCT SPECIFICATIONS:

For complete product specifications click HERE

PRODUCT DETAILS:

The MAVO Edge 6K Cyber Edition is a powerful new full-frame cinema camera with a body made from RAW steel. Equipped with a 6K full-frame 3:2 CMOS imaging sensor capable of shooting in 6K 75fps and 4K 150fps based on the high-performance computing platform of the MAVO Edge, the camera features dual native ISO (800/5120) and excellent highlights under various sensitivity settings. MAVO Edge 6K has an internal motorized full-spectrum e-ND filter(0.6-2.4), and integrates industry-standard ports and dual SSD media slots, capable of recording Apple ProRes4444/XQ and uncompressed RAW onto recording media based on NVMe M.2 2280 SSD. Weighing at only 3.6lbs, this compact and lightweight camera boasts powerful performance and versatility as it adapts to various demanding shooting scenarios. Like other Kinefinity cine cameras, MAVO Edge 6K brings natural color, pleasing skin tones, low noise, high dynamic range, and stunning details in an organic and delicate way.

The MAVO Edge 6K is the latest full-frame camera from Kinefinity since the release of MAVO Edge 8K, and it employs a full-frame 3:2 CMOS imaging sensor that not only shows cleaner images but also provides wider viewing angles, shallower depth of field, and more immersive presence. The advanced color processing architecture from the MAVO Edge platform creates images with low noise, high latitude, and wide color gamut, then brings stunning details, organic images with exceptional quality. In addition, the full-frame 6K CMOS sensor is perfectly paired with OLPF FF3 optical low pass filter that adopts a more complex and higher performance crystal process to“eliminate” aliasing/artifacts while keeping very sharp images.

The MAVO Edge 6K is equipped with dual native ISO, rated at 800 and 5120, as the second native ISO up to 5120 is perfect for low light scenes to obtain a clean image with high latitude and low noise, ideal for documentary filmmakers or those who favor available light during night shoots. 

MAVO Edge 6K outperforms its predecessor of MAVO LF a lot when it comes to highlight performance. At the industry standard ISO 800, the default highlight of the Edge 6K is 6.0 stops, capturing more highlight details to get a more cinematic look. Switch to Cine EI mode for more of a traditional cinema camera experience and highlight stops will adjust automatically as the EI changes. While using Cine EI mode, the second base native ISO 5120 is still activated when you go past 1600 EI.

From Apple ProRes422 LT to ProRes4444 XQ and uncompressed RAW codec, the MAVO Edge 6K is capable of recording high-resolution images with high dynamic range and with low to zero compression artifacts.

The MAVO Edge 6K supports 12-bit ProRes4444XQ in full frame rate and resolution, and it records with Kine LOG3 Gamma to preserve all the dynamic range captured by the CMOS imaging sensor.

The MAVO Edge 6K is equipped with a dual SSD slot based on PCIe-3.0 and its recording media, blazing-fast KineMAG Nano 1TB, is based on NVMe M.2 2280 SSD, ensuring storing uncompressed RAW stably and safely.

From capturing image data to color calibrating and tuning during encoding 6K ProRes4444XQ or storing uncompressed RAW to M.2 SSD, all these internal high bandwidth processing happens within the compact and lightweight body of the MAVO Edge 6K, quietly.

The MAVO Edge 6K is implemented with the latest KineOS 7.0 firmware, which has a redesigned user interface, and expected touch and tapping interaction with the camera. The new KineMON-5U2 and 7U2 with touchscreen monitors help to improve the user’s interactive experience and lower the learning curve.

The new interface design allows the user to control the entire functionality of the camera using only the touchscreen monitor.

Frame rate, shutter angle, ISO, aperture, ND strength, color temperature, LUTs, and audio levels can all be adjusted via touchscreen control, making it easy for the cinematographer to set up the parameters quickly.

In addition to the new UI, the MAVO Edge 6K firmware has come with many features. KineOS 7.0 supports Cooke/i protocol which enables the camera to record and save lens metadata into the footage, speeding up VFX workflow. Recording media also supports both NTFS and HFS file systems, for Windows and macOS.

The MAVO Edge 6K will also implement the pre-recording function in an anticipated firmware update. It ensures the cinematographer will not miss any shot during unpredictable scenes, providing a useful solution in live events and documentary works.

MAVO Edge 6K inherits the integrated body design of Kinefinity’s flagship product, MAVO Edge 8K which won the prestigious iF DESIGN AWARD 2021. Its ultra-high strength deformed Aluminum body has superior strength and toughness even at high temperatures to meet a wide range of photographic needs.

The compact camera body of the MAVO Edge 6K only weighs 1.6kg(3.6lbs), and it is equipped with a full-spectrum e-ND filter, dual SDI ports, multiple control ports, and multi-channel audio tracks, as well as powerful wired and wireless functions. The monitoring image from two proprietary video ports is independently displayed from SDI outputs at the rear. The video ports can be connected to the Kinefinity touchscreen monitor and micro-OLED viewfinder.

Kinefinity camera is with a native short flange distance KineMOUNT since KineRAW-S35, the first generation cinema camera released in 2012. 

MAVO Edge 6K is using the third-generation KineMOUNT that matches the large-format CMOS image sensor: With an ultra-short FFD and cine style locking method, the KineMOUNT can match richness of mounting adapters such as EF, passive E , PL and the LPL mounts that allows the photography to pair variable lenses with MAVO Edge camera seamlessly and capture with a wide range of lens styles. 

Whether small creation or large production can be handled easily with MAVO Edge 6K. 

PRODUCT SPECIFICATIONS: 

CMOS IMAGING SENSOR: 6K 3:2 Full Frame CMOS Imaging Sensor

Max Record Res: 6016×3984 (Open gate 3:2), 24M

Frame Rate:  0.2~75fps @FF 6K Wide, 0.2~150fps @S35 4K Wide

Active Area: 36x24mm, ø 43.3mm

Dual Base ISO: Regular Base ISO: 800 (500 – 2560), High Base ISO: 5120 (3200 – 20480)

Latitude: >14 stops

Shutter Angle: 0.7°~358° with rolling shutter

Lens Mount: Omni Native KineMOUNT, Short FFD Adapters: PL/LPL/Active EF/passive E

Optical Filter: OLPF with UV and IR-cut filter

ND Filter: Built-in motorized: Clear and e-ND from 0.6 to 2.4

CODECS, LUT

Record Codec

LUT

Record Media

KineLOG3, Neutral(Rec 709), Support Custom 3D LUT

Media Slot x2, for KineMAG Nano SSD 1TB based on NVMe M.2 SSD (3rd party NVMe M.2 2280 cards are also supported via the KineMAG Nano card body)

KineMAG Nano Size

1.6×3.5×0.35”/40x88x9mm (WxHxL)

RESOLUTION, FRAME RATE and OPTICAL FORMAT

Full Frame

S35

Other Cropping

MONITORING

Proprietary Video Port x2

SDI x2

For Kinefinity Viewfinder, KineMON-5U2/7U2 Ultra Bright Monitor with Touch Screen

3G/1.5G SDI x2 with Meta data (regular BNC)

AUDIO IN AND OUT

Linear PCM, 24bits, 48KHz

Built-in Mono Microphone

3.5mm Microphone Jack

48V Phantom-power Balanced Input x2 (regular XLR)

3.5mm Headphone Jack

Wireless & Network

Gigabit Ethernet (RJ45 type) for live stream, camera control and data transfer

WIFI 5 for live stream, camera control

3-axis accelerometer

SYNC AND CONTROL

Linear TC In&Out (0B5P)

Lens with RS232, Power output (0B6P)

SYNC with RS232 and Kinefinity camera sync(0B7P)

Rec trigger input with Power output (fisher 3P)

Data & Control, EXT1 & EXT2(for pogo-pin, 2×4 contacts)

Type-C USB x1, can be used for firmware updates and importing custom LUTs

POWER IN AND OUT

29W, when 6K HD 25p, liveview

Integrated V-mount battery plate, V-mount battery or BP-U compatible

DC Input (1B2P), 11~26V

UPS EXT 3(for pogo-pin, 2×5 contacts)

D-tap x1, Vbat @3A; Vbat as DC in or BAT in

RS x1, Vbat @3A (Shared with D-tap)

Lens x1, Vbat @3A

CONSTRUCTION AND SIZE

Ultra-high Strength Aircraft Aluminium

3.5lb/1.6kg

4.1×4.8×4.3?/106x124x109 mm (*w/o protrusion)

0°C ~ 40°C

PRODUCT DETAILS:

Get a robust range of accessories for your MAVO Edge 8K or 6K camera with the MAVO Edge Essential Accessory Pack from Kinefinity. This kit includes necessary components like a dedicated camera cage, a 5" onboard monitor package, a 1TB KineMAG Nano, two KineMAG Nano bodies, two V-mount batteries, two L-Series batteries with a dual charger, a hard-shell case, and more. Read more below about each item in this kit.

Kinefinity KineMON 5U II Monitor

 The KineMON 5U II Monitor from Kinefinity features a 5" LCD screen with a 1920 x 1080 resolution and brightness of 2000 cd/m². It supports input from the MAVO LF, TERRA 4K, or MEVO Edge 8K camera over a separately available proprietary cable that provides video and power to the monitor. It features a 1000:1 contrast ratio and supports 24-bit RGB colors and a 100% Rec.709 color gamut.

The monitor runs KineOS that allows you to view and adjust monitor settings. It features a fast boot-up time and low power consumption, and it provides a sharp picture with natural color. A 1/4"-20 mounting thread is provided on the bottom, top, and right sides to mount it onto the camera or rig using a variety of optional mounts. It is also compatible with the optional KineMON sun hood.

Kinefinity Kine Monitor Cable for KineMON (12”)

 Connect your KineMON with a MAVO or TERRA camera to monitor your camera output with this Kine Monitor Cable from Kinefinity. The 12" long cable features 14-pin connectors on either end to connect to the ports on your KineMON video input and your camera video output, and it provides both video and power from the camera to the monitor. There is a right-angle connector on one end for a better fit. This 12" length is recommended when your KineMON is mounted directly onto the MAVO/TERRA.

Kinefinity Swivel Mount for KineMON

 Mount your KineMON-5U or KineMON-7H monitor directly onto your TERRA or MEVO camera with this Swivel Mount from Kinefinity. The durable aluminum and steel mount provides a 1/4"-20 thumbscrew with anti-twist pins to mount the monitor, and padding on the top prevents the monitor from twisting or scratching. The mount attaches to the camera body using two captive screws. The mount tilts for the best position and secures with tension adjustment.

Kinefinity Cold Shoe Adapter Mount for KineMON

 Mount your KineMON-5U or KineMON-7H monitor onto a shoe mount for use with your TERRA or MEVO camera using this Cold Shoe Adapter Mount from Kinefinity. The aluminum and steel mount provides a 1/4"-20 thumbscrew with anti-twist pins on top to mount the monitor, and the mount attaches to any standard shoe mount using its shoe adapter on the base. The mount tilts for the best position and secures with tension adjustment.

Kinefinity KineEVF Wedge Block for KineMON 

Mount the KineEVF onto your KineMON 5U II or 7U with this KineEVF Wedge Block from Kinefinity. The aluminum wedge block mounts onto the side of the monitor using three included screws, and it provides a solid mount for the EVF bracket.

Compatibility 

• Kinefinity KineEVF
• Kinefinity KineMON 5U II and 7U monitors

Kinefinity Sun Hood for 5" KineMON-5U

 Protect your 5" KineMON-5U monitor from sunlight and glare with this Sun Hood from Kinefinity. The sun hood quickly attaches with elastic straps onto the KineMON-5U monitor. Four-sided coverage with black, weatherproof material provides optimal protection in extreme conditions, and it installs quickly and easily using elastic straps.

Key Features 

• A convenient elastic design makes it easy to take on/off and has a small, easy-to-carry footprint when stored.
• Four-sided glare protection, and the cover is made of rugged and waterproof material.
• Tailored for the KineMON-5U, the rear part of sun hood is perfectly matched with the KineMON screen, and it is suitable for outdoor use.

Kinefinity KineEVF OLED Viewfinder

 Add an EVF to your MAVO LF, Edge 8K, or TERRA 4K camera with this KineEVF OLED Viewfinder from Kinefinity. The viewfinder features a micro-OLED display with a 1920 x 1080 resolution that can view the video from your camera in crisp detail in 16 million colors. A built-in diopter allows you to adjust the focal view based on your eyesight. There is also a built-in proximity sensor to power off if it is not being used. The compact, lightweight EVF uses very little power, and it receives power and data using a separately available EVF cable from the camera.

Kinefinity Kine Video Cable for KineEVF (12", Right Angle)

 Connect your KineEVF viewfinder with a MAVO or TERRA camera to monitor your camera output with this Kine Video Cable from Kinefinity. The 12" long cable features 14-pin connectors on either end to connect to the ports on your KineEVF video input and your camera video output, and the camera provides both power and video to the viewfinder. There are right-angle connectors on each end for a better fit.

Kinefinity KineMAG Nano (1TB)

 Add fast and ample media for high-resolution video capture with your MAVO Edge 8K camera using the 1TB KineMAG Nano from Kinefinity. The KineMAG Nano is designed specifically for the MAVO Edge 8K camera slots, and it has a heat-dissipating plate on the body to keep the temperature cool. Inside, an NVMe M.2 2280 SSD allows you to record up to 1TB of video, and it features read-only and RAID 5 write settings for the safety of your data. To offload your data, there is a high-speed USB-C 3.1 Gen 2 port that allows you to transfer data up to 10 Gb/s directly to your computer.

Kinefinity KineMAG Nano Body

 Add fast and ample media for high-resolution video capture with your MAVO Edge 8K camera using the KineMAG Nano Body from Kinefinity. The KineMAG Nano body is designed specifically for the MAVO Edge 8K camera slot, and it has a heat-dissipating plate on the body to keep the temperature cool. This is an empty enclosure that accepts a separately available, third-party NVMe M.2 2280 SSD. To offload your data, there is a high-speed USB Type-C 3.1 Gen 2 port that allows you to transfer data up to 10 Gb/s directly to your computer.

Kinefinity Short 10 Gb/s USB Type-C Data Cable for KineMAG

 This Short 10 Gb/s USB Type-C Data Cable from Kinefinity is designed for offloading data from your KineMAG Nano SSD card to a computer with a USB Type-C port. Adhering to USB 3.1 standards, it can transfer data at speeds of up to 10 Gb/s, so you'll spend less time waiting for your edit session to start. The short cable features USB Type-C ports on either end.

Kinefinity KineBAT 150 V-Mount Battery (145Wh)

 Power your MAVO LF, MAVO Edge 8K, or TERRA 4K camera with the compact, lightweight KineBAT 150 V-Mount Battery from Kinefinity. This 145Wh battery can support up to 8A draw at a nominal 14.8V. It provides two USB Type-C accessory ports for powering a camera, various accessories, or mobile devices. One of the USB Type-C ports can also be used to charge the battery using a PD fast charger such as the Kinefinity 65W PD Power Adapter. There is a 5-LED status gauge to indicate the remaining battery life.

Key Features

Smart Charging

The KineBAT provides PD charging via a USB Type-C port and has discharging power up to 45W; for example, the Apple MacBook Pro (13") can fully charge in only 1-2 hours. It can be charged by a compact 65W PD Type-C power adapter.

Two USB Ports 

The KineBAT has two PD Type-C ports: one is for charging and discharging; the other is only for discharging. Two PD ports simultaneously provide a maximum of 45 and 30W of power with KineBAT for rapid charging.

Slim and Portable

The slim, compact battery is designed to adapt to lightweight filmmaking requirements yet has enough room to feature a 4-step LED gauge.

Circuit Protection 

Built-in circuit protection in KineBAT prevents overvoltage, undervoltage, overcurrent, overtemperature, and short-circuiting.

Kinefinity 65W PD Power Adapter

 Provide rapid charging for your batteries and battery chargers with this 65W PD Power Adapter from Kinefinity. The adapter features a standard AC wall plug and a USB Type-C output to provide 65W PD fast charge power to the separately available Kinefinity Hybrid Dual charger, so you can rapidly charge optional GripBAT batteries.

The adapter provides up to 3A current for a single battery and up to 2A per battery when charging multiple batteries with the separately available dual charger. It can also be used to provide PD fast charging for a professional V-mount battery or other USB Type-C devices.

Kinefinity 100W Power Cord for MAVO Edge 8K

 Power your MAVO Edge 8K camera from a mains or battery source with this 100W Power Cord from Kinefinity. The braided cable features a 2-pin connector on one end to plug into the camera's power input. The other end features a USB Type-C connector to plug into the optional Kinefinity 65W PD Power Adapter, power bank, or cine battery with a USB Type-C output.

Compatibility 

• Kinefinity MAVO Edge 8K camera
• USB Type-C power adapter or battery source

Kinefinity GripBAT 2S L-Series Battery

 The GripBAT 2S L-Series Battery from Kinefinity works with cameras, lights, and monitors that use Sony NP-F550/570 series batteries, and it comes in a striking red and white design. This battery pack features a capacity of 3500mAh / 26Wh and a 7.4V power output with a continuous 5A current.

The battery is well suited for powering L-series compatible light fixtures for extended lengths of time. Small and lightweight, lithium-ion batteries do not suffer from memory effects due to charging a partially discharged battery. The battery also features over/undervoltage, overcurrent, and over-temperature protection. It takes approximately 60 minutes to fully charge the battery using the separately available Kinefinity PD Hybrid Dual Charger.

Kinefinity PD Hybrid Dual Charger

 Keep all your GripBAT batteries charged with the PD Hybrid Dual Charger from Kinefinity. The charger allows you to charge two GripBAT 2S L-series batteries, two GripBAT 4S BP-U30 batteries, or one of each simultaneously, even though they are different battery types.

The charger also allows you to charge the batteries using PD fast charge with the optional 65W PD power adapter. The charger is powered using a separately available USB Type-C charge cable or adapter that supports 60W and above PD charging, and the Kinefinity 65W PD Power Adapter is recommended.

Compatibility 

• Kinefinity GripBAT 2S L-series batteries
• Kinefinity GripBAT 4S BP-U30 batteries

Kinefinity 65W PD Power Adapter

 Provide rapid charging for your batteries and battery chargers with this 65W PD Power Adapter from Kinefinity. The adapter features a standard AC wall plug and a USB Type-C output to provide 65W PD fast charge power to the separately available Kinefinity Hybrid Dual charger, so you can rapidly charge optional GripBAT batteries.

The adapter provides up to 3A current for a single battery and up to 2A per battery when charging multiple batteries with the separately available dual charger. It can also be used to provide PD fast charging for a professional V-mount battery or other USB Type-C devices.

Kinefinity KineKIT Edge Camera Cage for MAVO Edge

 Add a variety of mounting options to your MAVO Edge with this KineKIT Edge Camera Cage from Kinefinity. The cage is made up of a D-shaped top handle, a top plate, a mini viewfinder bracket for the KineEVF, a top NATO rail, a side plate with rosette, a 15mm baseplate with dual L-series power option, and a bottom adapter plate.

The baseplate can provide a battery backup for your camera using two optional L-series batteries such as the GripBAT 2S. The camera mounts onto a contact plate to draw battery power, allowing you to swap the main camera batteries with uninterrupted power. The bottom plate can be extended with a separately available 19mm rod baseplate using an optional dovetail plate.

Key Features

Full-Featured Cage

The KineKIT-Edge is designed for every scenario, such as tripod, gimbal, or Steadicam

Closed Top Handgrip

 Go from handheld to gimbal with this ergonomic design by sliding the handle on or off and secure into place with a locking lever

Top Plate

 1/4"-20 threads on its side allow users to mount the Mini EVF bracket directly to the top plate

Top NATO Rail

 Install wireless follow focus motor directly through 15mm aluminum rods

Side Support

 One ARRI rosette and 1/4"-20 threads designed for mounting a side handgrip

Power Baseplate

 Two L-series batteries can provide AN uninterrupted power supply for the camera by inserting into the baseplate (for best performance, the GripBAT 2S capacity is 2000mAh)

Mini Viewfinder Bracket

 KineEVF can be directly attached to the camera body for lightweight operation

Bottom Adapter Plate 

The bottom plate matches Movcam's Sliding Dovetail Plate to adjust the center of weight while on a tripod, and the kit can go from a 15mm system to a 19mm system by adding the 15mm to 19mm baseplate to the bottom

Kinefinity Hard-Shell Carry Case for MAVO Edge 6K/8K 

Protect and transport your MAVO Edge 6K or 8K camera and accessories with this Hard-Shell Carry Case from Kinefinity. The durable hard case features a custom-cut foam insert to hold your MAVO Edge 6K or 8K camera along with batteries, charger, cables, media, and other accessories. The case closes via locking latches on three sides, and padlock holes allow you to secure it further. A handle provides a durable carry option.

PRODUCT DETAILS:

Add pro EVF viewing to your MAVO Edge 8K or 6K camera with the MAVO Edge Pro Accessory Pack from Kinefinity. This kit bundles the KineEVF OLED Viewfinder with necessities like a dedicated camera cage, a 5" onboard monitor package, two 1TB KineMAG Nanos, two V-mount batteries, two GripBAT BP-U30 batteries, two GripBAT L-Series batteries with a dual charger, a hard-shell case, and more. Read more below about the items in this kit.

Kinefinity KineMON 5U II Monitor

 The KineMON 5U II Monitor from Kinefinity features a 5" LCD screen with a 1920 x 1080 resolution and brightness of 2000 cd/m². It supports input from the MAVO LF, TERRA 4K, or MEVO Edge 8K camera over a separately available proprietary cable that provides video and power to the monitor. It features a 1000:1 contrast ratio and supports 24-bit RGB colors and a 100% Rec.709 color gamut.

The monitor runs KineOS that allows you to view and adjust monitor settings. It features a fast boot-up time and low power consumption, and it provides a sharp picture with natural color. A 1/4"-20 mounting thread is provided on the bottom, top, and right sides to mount it onto the camera or rig using a variety of optional mounts. It is also compatible with the optional KineMON sun hood.

Kinefinity Kine Monitor Cable for KineMON (12”)

 Connect your KineMON with a MAVO or TERRA camera to monitor your camera output with this Kine Monitor Cable from Kinefinity. The 12" long cable features 14-pin connectors on either end to connect to the ports on your KineMON video input and your camera video output, and it provides both video and power from the camera to the monitor. There is a right-angle connector on one end for a better fit. This 12" length is recommended when your KineMON is mounted directly onto the MAVO/TERRA.

Kinefinity Swivel Mount for KineMON

 Mount your KineMON-5U or KineMON-7H monitor directly onto your TERRA or MEVO camera with this Swivel Mount from Kinefinity. The durable aluminum and steel mount provides a 1/4"-20 thumbscrew with anti-twist pins to mount the monitor, and padding on the top prevents the monitor from twisting or scratching. The mount attaches to the camera body using two captive screws. The mount tilts for the best position and secures with tension adjustment.

Kinefinity Cold Shoe Adapter Mount for KineMON

 Mount your KineMON-5U or KineMON-7H monitor onto a shoe mount for use with your TERRA or MEVO camera using this Cold Shoe Adapter Mount from Kinefinity. The aluminum and steel mount provides a 1/4"-20 thumbscrew with anti-twist pins on top to mount the monitor, and the mount attaches to any standard shoe mount using its shoe adapter on the base. The mount tilts for the best position and secures with tension adjustment.

Kinefinity KineEVF Wedge Block for KineMON

 Mount the KineEVF onto your KineMON 5U II or 7U with this KineEVF Wedge Block from Kinefinity. The aluminum wedge block mounts onto the side of the monitor using three included screws, and it provides a solid mount for the EVF bracket.

 Compatibility 

• Kinefinity KineEVF
• Kinefinity KineMON 5U II and 7U monitors

Kinefinity Sun Hood for 5" KineMON-5U

 Protect your 5" KineMON-5U monitor from sunlight and glare with this Sun Hood from Kinefinity. The sun hood quickly attaches with elastic straps onto the KineMON-5U monitor. Four-sided coverage with black, weatherproof material provides optimal protection in extreme conditions, and it installs quickly and easily using elastic straps.

Key Features 

• A convenient elastic design makes it easy to take on/off and has a small, easy-to-carry footprint when stored.
• Four-sided glare protection, and the cover is made of rugged and waterproof material.
• Tailored for the KineMON-5U, the rear part of sun hood is perfectly matched with the KineMON screen, and it is suitable for outdoor use.

Kinefinity KineEVF OLED Viewfinder

 Add an EVF to your MAVO LF, Edge 8K, or TERRA 4K camera with this KineEVF OLED Viewfinder from Kinefinity. The viewfinder features a micro-OLED display with a 1920 x 1080 resolution that can view the video from your camera in crisp detail in 16 million colors. A built-in diopter allows you to adjust the focal view based on your eyesight. There is also a built-in proximity sensor to power off if it is not being used. The compact, lightweight EVF uses very little power, and it receives power and data using a separately available EVF cable from the camera.

Kinefinity Kine Video Cable for KineEVF (12", Right Angle)

 Connect your KineEVF viewfinder with a MAVO or TERRA camera to monitor your camera output with this Kine Video Cable from Kinefinity. The 12" long cable features 14-pin connectors on either end to connect to the ports on your KineEVF video input and your camera video output, and the camera provides both power and video to the viewfinder. There are right-angle connectors on each end for a better fit.

Kinefinity KineMAG Nano (1TB)

 Add fast and ample media for high-resolution video capture with your MAVO Edge 8K camera using the 1TB KineMAG Nano from Kinefinity. The KineMAG Nano is designed specifically for the MAVO Edge 8K camera slots, and it has a heat-dissipating plate on the body to keep the temperature cool. Inside, an NVMe M.2 2280 SSD allows you to record up to 1TB of video, and it features read-only and RAID 5 write settings for the safety of your data. To offload your data, there is a high-speed USB-C 3.1 Gen 2 port that allows you to transfer data up to 10 Gb/s directly to your computer.

Kinefinity Short 10 Gb/s USB Type-C Data Cable for KineMAG

 This Short 10 Gb/s USB Type-C Data Cable from Kinefinity is designed for offloading data from your KineMAG Nano SSD card to a computer with a USB Type-C port. Adhering to USB 3.1 standards, it can transfer data at speeds of up to 10 Gb/s, so you'll spend less time waiting for your edit session to start. The short cable features USB Type-C ports on either end.

Kinefinity KineBAT 150 V-Mount Battery (145Wh)

 Power your MAVO LF, MAVO Edge 8K, or TERRA 4K camera with the compact, lightweight KineBAT 150 V-Mount Battery from Kinefinity. This 145Wh battery can support up to 8A draw at a nominal 14.8V. It provides two USB Type-C accessory ports for powering a camera, various accessories, or mobile devices. One of the USB Type-C ports can also be used to charge the battery using a PD fast charger such as the Kinefinity 65W PD Power Adapter. There is a 5-LED status gauge to indicate the remaining battery life.

Key Features

Smart Charging

The KineBAT provides PD charging via a USB Type-C port and has discharging power up to 45W; for example, the Apple MacBook Pro (13") can fully charge in only 1-2 hours. It can be charged by a compact 65W PD Type-C power adapter.

Two USB Ports

 The KineBAT has two PD Type-C ports: one is for charging and discharging; the other is only for discharging. Two PD ports simultaneously provide a maximum of 45 and 30W of power with KineBAT for rapid charging.

Slim and Portable

The slim, compact battery is designed to adapt to lightweight filmmaking requirements yet has enough room to feature a 4-step LED gauge.

Circuit Protection

 Built-in circuit protection in KineBAT prevents overvoltage, undervoltage, overcurrent, overtemperature, and short-circuiting.

Kinefinity 65W PD Power Adapter

 Provide rapid charging for your batteries and battery chargers with this 65W PD Power Adapter from Kinefinity. The adapter features a standard AC wall plug and a USB Type-C output to provide 65W PD fast charge power to the separately available Kinefinity Hybrid Dual charger, so you can rapidly charge optional GripBAT batteries.

The adapter provides up to 3A current for a single battery and up to 2A per battery when charging multiple batteries with the separately available dual charger. It can also be used to provide PD fast charging for a professional V-mount battery or other USB Type-C devices.

Kinefinity GripBAT 4S BP-U30 Battery

 Power your MAVO or TERRA camera with the GripBAT 4S BP-U30 Battery from Kinefinity. The GripBAT 4S is also compatible with Sony cameras that accept a BP-U30 battery, such as the FS5, FS7, FX6, and FX9. This battery pack features a capacity of 45Wh and 14.8V power output with a continuous 5A current.

Small and lightweight, lithium-ion batteries do not suffer from memory effects due to charging a partially discharged battery. The battery also features over/undervoltage, overcurrent, and overtemperature protection. A 4-LED status meter indicates the remaining battery level.

Kinefinity PD Hybrid Dual Charger

 Keep all your GripBAT batteries charged with the PD Hybrid Dual Charger from Kinefinity. The charger allows you to charge two GripBAT 2S L-series batteries, two GripBAT 4S BP-U30 batteries, or one of each simultaneously, even though they are different battery types.

The charger also allows you to charge the batteries using PD fast charge with the optional 65W PD power adapter. The charger is powered using a separately available USB Type-C charge cable or adapter that supports 60W and above PD charging, and the Kinefinity 65W PD Power Adapter is recommended.

Compatibility 

• Kinefinity GripBAT 2S L-series batteries
• Kinefinity GripBAT 4S BP-U30 batteries

Kinefinity 65W PD Power Adapter

 Provide rapid charging for your batteries and battery chargers with this 65W PD Power Adapter from Kinefinity. The adapter features a standard AC wall plug and a USB Type-C output to provide 65W PD fast charge power to the separately available Kinefinity Hybrid Dual charger, so you can rapidly charge optional GripBAT batteries.

The adapter provides up to 3A current for a single battery and up to 2A per battery when charging multiple batteries with the separately available dual charger. It can also be used to provide PD fast charging for a professional V-mount battery or other USB Type-C devices.

Kinefinity GripBAT 2S L-Series Battery

 The GripBAT 2S L-Series Battery from Kinefinity works with cameras, lights, and monitors that use Sony NP-F550/570 series batteries, and it comes in a striking red and white design. This battery pack features a capacity of 3500mAh / 26Wh and a 7.4V power output with a continuous 5A current.

The battery is well suited for powering L-series compatible light fixtures for extended lengths of time. Small and lightweight, lithium-ion batteries do not suffer from memory effects due to charging a partially discharged battery. The battery also features over/undervoltage, overcurrent, and over-temperature protection. It takes approximately 60 minutes to fully charge the battery using the separately available Kinefinity PD Hybrid Dual Charger.

Kinefinity KineKIT Edge Camera Cage for MAVO Edge

 Add a variety of mounting options to your MAVO Edge with this KineKIT Edge Camera Cage from Kinefinity. The cage is made up of a D-shaped top handle, a top plate, a mini viewfinder bracket for the KineEVF, a top NATO rail, a side plate with rosette, a 15mm baseplate with dual L-series power option, and a bottom adapter plate.

The baseplate can provide a battery backup for your camera using two optional L-series batteries such as the GripBAT 2S. The camera mounts onto a contact plate to draw battery power, allowing you to swap the main camera batteries with uninterrupted power. The bottom plate can be extended with a separately available 19mm rod baseplate using an optional dovetail plate.

Key Features

Full-Featured Cage

The KineKIT-Edge is designed for every scenario, such as tripod, gimbal, or Steadicam

Closed Top Handgrip

 Go from handheld to gimbal with this ergonomic design by sliding the handle on or off and secure into place with a locking lever

Top Plate

 1/4"-20 threads on its side allow users to mount the Mini EVF bracket directly to the top plate

Top NATO Rail

 Install wireless follow focus motor directly through 15mm aluminum rods

Side Support

 One ARRI rosette and 1/4"-20 threads designed for mounting a side handgrip

Power Baseplate

 Two L-series batteries can provide AN uninterrupted power supply for the camera by inserting into the baseplate (for best performance, the GripBAT 2S capacity is 2000mAh)

Mini Viewfinder Bracket

 KineEVF can be directly attached to the camera body for lightweight operation

Bottom Adapter Plate

 The bottom plate matches Movcam's Sliding Dovetail Plate to adjust the center of weight while on a tripod, and the kit can go from a 15mm system to a 19mm system by adding the 15mm to 19mm baseplate to the bottom

Kinefinity 100W Power Cord for MAVO Edge 8K

 Power your MAVO Edge 8K camera from a mains or battery source with this 100W Power Cord from Kinefinity. The braided cable features a 2-pin connector on one end to plug into the camera's power input. The other end features a USB Type-C connector to plug into the optional Kinefinity 65W PD Power Adapter, power bank, or cine battery with a USB Type-C output.

Compatibility

• Kinefinity MAVO Edge 8K camera
• USB Type-C power adapter or battery source

Kinefinity Hard-Shell Carry Case for MAVO Edge 6K/8K 

Protect and transport your MAVO Edge 6K or 8K camera and accessories with this Hard-Shell Carry Case from Kinefinity. The durable hard case features a custom-cut foam insert to hold your MAVO Edge 6K or 8K camera along with batteries, charger, cables, media, and other accessories. The case closes via locking latches on three sides, and padlock holes allow you to secure it further. A handle provides a durable carry option.